ROSSI-- BRAZTECH Standard Revolver

Rossi R35202 Revolver 38 Special 2" 5rd Black Rubber Grip Stainless Steel

Rossi offers two small frame, 5 shot revolvers chambered in .38 Special + P
the Model 351 in blue steel and the Model 352 in stainless steel. Two-inch
barrels make them favorites for concealed carry and home defense,
especially when loaded to their full potential.


SPECIFICATIONS:
Mfg Item Num: R35202
Category: REVOLVERS
Type :Revolver
Action :Single/Double
Caliber :38 Special
Barrel Length :2"
Capacity :5
Hammer Style :Spurred
Grips :Black Rubber
Sights :Fixed
Weight :24 oz
Frame Finish :Stainless

HI POINT FIREARMS (MKS) Rhino Black

Hi Point 340071 Rhino Chiappa Rhino 357 RemMag 4" 6rd Wood Grip Black

The Chiappa Rhino has revolutionized the revolver with a patented design
that tames the prehistoric characteristic that most revolvers possess. The
Chiappa Rhino barrel is aligned with the bottom most chamber which is the
key component to Rhino's tame characteristics. The position of the barrel
lowers the center of gravity and yields a centerline of the bore more in
line with the shooter's arm allowing for the most natural "point ability"
while engaging a target. This characteristic also drastically reduces both
recoil and muzzle flip which insures subsequent shots to be on target
faster than ever before. The reduction of the recoil allows for the use of
ultra light alloys to be used in the construction of the Rhino minimizing
any adverse effect. The flat sided cylinder design of the Rhino reduces the
typical revolver profile allowing greater concealment. With choices from 2"
to 6" barrel lengths and sight options, the Rhino is truly a multipurpose
handgun capable of reliable defensive duty, scoring ten rings, and taking
game. Featuring both double and single action characteristics, the single
action is actuated by a hammer cocking device that engages the unexposed
hammer to prepare to fire.


SPECIFICATIONS:
Mfg Item Num: 340071
Category: REVOLVERS
Type :Revolver
Action :Single/Double
Caliber :357 Remington Magnum
Barrel Length :4"
Capacity :6
Hammer Style :
Grips :Wood
Sights :
Weight :1.7 lbs
Frame Finish :Black

BROWNING 1911-22 Compact

Browning 051803490 BuckMark 1911-22 Cmpct 22LR 3.62" 10+1 Comp Grip Matte Blue

You will find a familiar friend in the 1911-22 Compact pistol. All controls
operate just as those in the original John M. Browning-designed Model 1911.
The action is the straight blow back design that offers enhanced simplicity
and reliability. The frame is machined to exacting tolerances from aluminum
and the vertical serrations on the slide provide and improved cocking grip
and the convenient manual slide release is easily operated with the
shooting or support hand. It has a large manual thumb safety and grip
safety. The 10 round steel magazine body is heat treated for long-term
feeding reliability, long life and the magazine release is positioned
adjacent to the trigger guard for convenient operation.


SPECIFICATIONS:
Mfg Item Num: 051803490
Category: PISTOLS
Type :Pistol
Action :Single
Caliber :22 Long Rifle
Barrel Length :3.6"
Capacity :10+1
Safety :Thumb and Grip
Grips :Brown Checkered Plastic
Sights :Fixed
Weight :15 oz
Frame Finish :Blued

Smith & Wesson M&P40 Pro Series C.O.R.E.

$729.00 *

*Suggested Retail, Dealer Sets Actual Pricing

• Purpose: Competitive
  Recreational
  Home Protection
   

  SKU: 178060
  
  Special Features

  3-Interchangeable Newly Enhanced Textured Palmswell Grip Sizes
  
  Slide cut to accept the following optics – Trijicon RMR, Leupold Delta Point, Jpoint, Doctor, C-More STS, Insight MRDS
  Based on the popular Pro Series line of competition ready firearms, the new M&P C.O.R.E (Competition Optics Ready Equipment) models offer consumers a specialized platform for adding accessory optics to their personal handguns. Engineered to accept six popular styles of competition based optics, the M&P C.O.R.E models are easily adapted to meet any demand.
  
  
  ALL BACKED BY OUR SMITH & WESSON LIFETIME SERVICE POLICY.
  
   

SMITH & WESSON INC Standard Stainless

S&W 163504 500 Mod 500 S&W 4" 5rd Syn Grip Matte Stainless Finish

In 2003 the gunsmiths and engineers at Smith & Wesson wanted to deliver
maximum power for serious handgun hunters. The power they sought required
an entirely new frame, the massive "X-Frame" and was the basis for the
Model S&W500, the most powerful production revolver in the world. This
ushered in the era of the "big gun" and was only the beginning. For
ultimate power and velocity there's nothing even close to an X-Frame model
handgun.


SPECIFICATIONS:
Mfg Item Num: 163504
Category: REVOLVERS
Type :Revolver
Action :Single/Double
Caliber :500 Smith & Wesson
Barrel Length :4"
Capacity :5
Hammer Style :
Grips :Synthetic
Sights :Red Ramp front/Adjustable rear
Weight :56 oz
Frame Finish :Stainless
 

GLOCK INC Standard

Glock PI3050201 G30 Standard 45 ACP 3.78" 10+1 w/FS Polymer Grip Blk

The Glock 30 in the legendary .45 caliber offers excellent out-of-the-box
precision paired with the ballistic quality of a genuine big bore caliber.
The smooth design and the simple operation of this Glock pistol allow a
quick draw. Because of these advantages and especially because of its
compact dimensions, the Glock 30 is the first choice of plainclothes
officers and protection personnel.


SPECIFICATIONS:
Mfg Item Num: PI3050201
Category: FIREARMS - HANDGUNS
Type :Pistol
Action :Double Action
Caliber :45 Automatic Colt Pistol
Barrel Length :3.78"
Capacity :10+1
Safety :Trigger
Grips :Polymer
Sights :Fixed
Weight :23.99 oz
Finish :Black

SIG SAUER INC                Two-Tone    
	
The Two-Tone Sub-Compact 9mm, the most innovative and versatile polymer
pistol. Designed to be the ultimate in conceal carry. This unique 9mm
pistol is the perfect small defense handgun that meets the demands of
today's law enforcement professionals as a backup duty gun, and responsible
citizens as a conceal carry gun.

	
SPECIFICATIONS:
Mfg Item Num:       290RS9TSS   
Category:           FIREARMS - HANDGUNS           
Type                :Pistol
Action              :Double Action
Caliber             :9mm
Barrel Length       :2.9"
Capacity            :6+1/8+1
Safety              :Thumb
Grips               :Interchangeable Polymer
Sights              :Siglite Night Sights
Weight              :20.5 oz
Finish              :2 Tone

The P-11 is a semi-automatic, locked-breech, DAO, pistol, chambered for the 9mm Luger cartridge. Ten round and optional twelve round magazines available. The Kel- Tec P-11 is compact and lightweight, thanks to its locked breech. Its ergonometry, perceived recoil and practical accuracy are comparable to much larger guns. The P-11 is especially well suited for plain-clothes police officers, security personnel, or as a secondary weapon for military service members. From the very beginning of the design and development, computers have been used exclusively. All machined components are also made on modern high speed computerized equipment. Equally advanced quality control equipment and test procedures ensure a firearm with uncompromising quality in materials and workmanship.

The P-11 has six main component groups: barrel, slide, frame, firing mechanism, grip, and magazine. The barrel is made of SAE 4140 Ordnance steel heat treated to 47 HRC. The slide is also 4140 steel, and contains the firing pin and the extractor. The rectangular frame is machined from solid 7075-T6 aluminum and houses the firing mechanism. The trigger connects via a transfer bar to the hammer and operates in Double Action Only. The hammer is driven by a novel free floating extension spring. The light weight firing pin transmits the energy of the hammer to ignite the primer. The functioning of the mechanism surpasses all applicable SAAMI safety standards.
    The grip is made of the ultra high impact polymer DuPont ST-8018. The grip also forms the magazine well and the trigger guard. Normally supplied with a 10-round double column all steel magazine, the P-11 will also accept larger capacity magazines for S&W model 59 series of pistols. To improve the handling with S&W magazines we recommend using our slip on magazine extension.

Specifications:

MSRP $419.00

The TASER C2 is a self-defense electronic control device.  Electronic Control Devices (ECDs) use propelled wires to conduct energy to affect the sensory and motor functions of the nervous system.  In addition, the TASER C2 can be used as a direct contact stun device.  The TASER C2 uses a replaceable TASER cartridge, containing compressed nitrogen, to deploy two small probes that are attached to the TASER C2 by insulated conductive wires with a maximum length of 15 feet (4.5 meters).  The energy can penetrate up to two cumulative inches of clothing or one inch per probe.

Advanced Features

For more info. visit the Taser Website: http://www.taser.com/products/consumers/Pages/default.aspx

Sccy Industries Model CPX-1

The model CPX-1 is our first production model. Much care has been taken to ensure it is a high quality product with many features other handguns in the price range do not offer.

• Weight – 15 oz
• Width – 1”
• Length – 5.7”
• Height – 4”

Key Benefits

• 9mm 10+1 Round Capacity
• Standard with Two Magazines
• Lock Breech
• Stainless Steel Slide
• Stainless Steel Barrel
• Ambidextrous Safety
• Slide Hold Open on Last Round
• Adjustable Rear Sight
• Internal Hammer
• Double Action Only (DAO)
• Polymer Frame
• Child Resistant Lock
• Light Weight - Compact
• Magazine Finger Rest
• Trigger Pull - Smooth, Consistent 9 lbs - (DOA)
• Double Action Only with Second Strike Capacity
   
• MSRP $359.99 in Black or Two-Tone

The P-11 is a semi-automatic, locked-breech, DAO, pistol, chambered for the 9mm Luger cartridge. Ten round and optional twelve round magazines available. The Kel- Tec P-11 is compact and lightweight, thanks to its locked breech. Its ergonometry, perceived recoil and practical accuracy are comparable to much larger guns. The P-11 is especially well suited for plain-clothes police officers, security personnel, or as a secondary weapon for military service members. From the very beginning of the design and development, computers have been used exclusively. All machined components are also made on modern high speed computerized equipment. Equally advanced quality control equipment and test procedures ensure a firearm with uncompromising quality in materials and workmanship.

The P-11 has six main component groups: barrel, slide, frame, firing mechanism, grip, and magazine. The barrel is made of SAE 4140 Ordnance steel heat treated to 47 HRC. The slide is also 4140 steel, and contains the firing pin and the extractor. The rectangular frame is machined from solid 7075-T6 aluminum and houses the firing mechanism. The trigger connects via a transfer bar to the hammer and operates in Double Action Only. The hammer is driven by a novel free floating extension spring. The light weight firing pin transmits the energy of the hammer to ignite the primer. The functioning of the mechanism surpasses all applicable SAAMI safety standards.
    The grip is made of the ultra high impact polymer DuPont ST-8018. The grip also forms the magazine well and the trigger guard. Normally supplied with a 10-round double column all steel magazine, the P-11 will also accept larger capacity magazines for S&W model 59 series of pistols. To improve the handling with S&W magazines we recommend using our slip on magazine extension.

This revolver has original box but no owner's manual.

COLT MFG CO INC Trophy

Colt O5070X Gold Cup Trophy 45 ACP 5" 8+1 Black Rubber Grip Stainless

Today, the Colt Gold Cup is known as the finest shooting automatic in the
world, and is the standard for competition guns. Features include 5" match
grade barrel, adjustable aluminum trigger, adjustable rear sight, beveled
magazine well and beavertail grip safety.


SPECIFICATIONS:
Mfg Item Num: O5070X
Category: FIREARMS - HANDGUNS
Type :Pistol
Action :Single
Caliber :45 Automatic Colt Pistol
Barrel Length :5"
Capacity :8+1
Safety :Thumb and Grip
Grips :Black Rubber
Sights :Dovetail Front Champion rear
Weight :39 oz
Finish :Stainless

AMERICAN TACTICAL IMPORTS 1911

American Tactical ATIGFX45TIS FX 1911 45 ACP 3.18" 7+1 Mahogany Grip Stainless

ATI Firepower Xtreme .45ACP caliber 1911 pistol series from Shooters Arms
Manufacturing. Available in 5 different models, from classic military,
competition and bull barrel designs, the FX 1911 series features all steel
parts, solid mahogany grips and a price point that won't break the bank.
Compatible with many different brands of 1911 magazine, the FX series is
certain to have the 1911 pistol enthusiast set for hours of satisfactory
shooting.


SPECIFICATIONS:
Mfg Item Num: ATIGFX45TIS
Category: FIREARMS - HANDGUNS
Type :Pistol
Action :Semi-Auto
Caliber :45 Automatic Colt Pistol
Barrel Length :3.18"
Capacity :7+1
Safety :Manual Thumb & Grip
Grips :Mahogany
Sights :Adjustable
Weight :
Finish :Stainless

Specifications: